BYSXV - MUSSEN - 400 NEOPRENE CONTACT CEMENT

  • MSDS: BYSXV
  • Manufacturer: ARCHEM CORP
  • Product Name: MUSSEN - 400 NEOPRENE CONTACT CEMENT
  • National Stock Number: 8040-00N062913
Product Identification

Product ID:MUSSEN - 400 NEOPRENE CONTACT CEMENT
MSDS Date:03/01/1987
FSC:8040
NIIN:00N062913
MSDS Number: BYSXV

Responsible Party
ARCHEM CORP
1514 ELEVENTH ST
PORTSMOUTH, OH 45662
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 614-353-1125

Cage: HO806

Contractor
ARCHEM CORP
PORTSMOUTH, OH 45662 US

Telephone: 614-353-1125

Cage: HO806

Ingredients

2-BUTANONE; (MEK) (SARA 313) (CERCLA)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 23%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM;300 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


HEXANE (CERCLA)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 36.99%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


TOLUENE (SARA 313) (CERCLA)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15-20%

OSHA PEL 200 PPM

ACGIH TLV: 50 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ZINC OXIDE (SARA 313) (CERCLA)

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 0.85%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


MAGNESIUM OXIDE

CAS: 1309-48-4

RTECS: OM3850000

Fraction By Weight: 0.34%

OSHA PEL 15 MG/M3 PARTICULATE

ACGIH TLV: 10 MG/M3 FUME

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DRY THROAT, NAUSEA, DRY SKIN,
DIFFICULTY BREATHING. NOTE:TOLUENE APPEARS ON THE NAVY LISTING OF
OCCUPATIONAL CHEMICAL REPRODUCTIVE HAZARDS. SEEK CONSULTATION FROM
APPROPRIATE HEALTH PROFESSIONALS CONC ERNING LATEST HAZARD LIST
INFORMATION &SAFE HANDLING & EXPOSURE INFORMATION .
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ANY DIFFICULTY IN BREATHING.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM AREA TO OPEN
AREA W/PLENTY OF VENTILATION - LIE DOWN, KEEP QUIET. CALL MD.
SKIN:WASH AFFECTED AREA IMMEDIATELY W/SOAP & WATER - CLEAN W/BABY
OIL OR VASELINE. EYES:FLUSH W/LOTS OF WATER FOR AT LEAST 15
MINUTES & CALL MD IMMEDIATELY.

Fire Fighting

Flash Point Method:TCC
Flash Point:0F,-18C
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL EXTINGUISHER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . AIM AT BASE OF FIRE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:CLEAN UP W/NON-FLAMMABLE SOLVENT - KEEP
CONTAINED AS MUCH AS POSSIBLE - USE ABSORBANT TO SOAK UP AS MUCH AS
POSSIBLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT SMOKE WHEN USING - STORE IN
DRY, COOL AREA AWAY FROM FIRE & FLAME. KEEP AWAY FROM FIRE & FLAME
- USE CAUTION UNTIL VAPORS HAVE CLEARED.
Other Precautions:AVOID OVEREXPOSURE TO VAPORS. REMOVE BUNGS SLOWLY
FROM DRUMS - AVOID OVEREXPOSURE TO VAPORS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED CONTAINED TYPE RESPIRATOR.
Ventilation:AS MUCH AS POSSIBLE - LOCAL & MECHANICAL (SPARK PROOF).
Protective Gloves:IMPERVIOUS GLOVES (NEOPRENE, ETC).
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER USE. IF NO SKIN CLEAN
IMMEDIATELY W/VASELINE OR BABY OIL.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:151F,66C
Vapor Pres:137
Vapor Density:3.14
Spec Gravity:0.81 (H*2O=1)
Evaporation Rate & Reference:2.7 (MIN)
Solubility in Water:NONE
Appearance and Odor:LIGHT TO TAN COLOR; SOLVENT ODOR.
Percent Volatiles by Volume:74.99

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . ALLOW TO DRY & SOLVENTS TO EVAPORATE - (CRUSH EMPTY
CONTAINERS) 1ST - TRIPLE RINSE & KEEP BUNGS TIGHTLY SEALED UNTIL
DISPOSED OF. DISP OSE OF IN APPROVED LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.